Refrigeration Evaporator-Fill in blanks

Refrigeration Evaporator-Fill in blanks

It will improve the deep understanding of a evaporator used in refrigeration. Evaporators are the

cooling unit in a refrigeration unit. Both dry and flooded evaporators produce cooling using latent heat.

  1. Evaporator used in the domestic units is called ————-evaporator.
  2. Commercial refrigeration uses an evaporator which is called ————-evaporator.
  3. Industrial  refrigeration uses an evaporator which is called ————-evaporator.
  4. The evaporator is fitted between —————- and —————-.
  5.  Degree of super heat in dry evaporators is ————–.
  6. But flooded evaporator require   ————–degree of super heat.
  7. Standard degree of super heat  is ————–.
  8.  In actual practice, degree of super heat is ————–.
  9. Refrigerant evaporates in the evaporator by taking ——–heat in the evaporator.
  10. Evaporation of refrigerant is by taking heat from the ——–to be cooled in the evaporator.
  11.  Other name of evaporator is  ——unit.
  12. Pressure of the refrigerant is ——in the evaporator.
  13. Temperature of the refrigerant is ——in the evaporator.
  14. State of the refrigerant at the inlet of the evaporator is mostly————.
  15. At the outlet of the dry evaporator, state of the refrigerant  is ————-vapor.
  16. Name of the unit between the flooded evaporator and compressor is ————.
  17.  Expansion valve used with dry evaporators is ————-.
  18. The expansion valve used with flooded evaporators is ——-side float
  19. Evaporation temperature in the evaporator depends upon the ————in the evaporator.
  20.  Evaporator pressure is linked to the ——boiling point of the refrigerant.
  21.  Most of the evaporators have pressure  ———- atmospheric pressure.
  22.  Outlet of the flooded evaporator has refrigerant as  ——–and————.
  23. Material of the evaporator tubes is ————–with ammonia as refrigerant.
  24. Tubes of  evaporator are made of  ————–with refrigerant R-134a.
  25.  COP of a refrigeration unit———–with the decrease of evaporation temperature.
  26. Power input increases as evaporator temperature ————.


  1. Dry, 2. Dry, 3. Flooded, 4. Expansion vale, compressor,,, 7.50C, 8. Variable, 9.latent, 10. Products, 11. Cooling, 12. Low, 13. Low, 14. Liquid, 15.saturated, 16. Accumulator, 17. Capillary tube, 18.Low, 19. Pressure, 20. Normal, 21. Above, 22. Liquid, vapor, 23. Steel, 24. Copper, 25. Decreases, 26. decreases