SOM ASSIGNMENT ON BUCKLING OF COLUMNS For what length of a hollow steel column of 40 mm external diameter and 30 mm internal diameter used as a strut if Euler’s theory is applicable for buckling and σc = 330 N/mm2, E =210 GN/m2 (a) when both ends are fixed, (b) One end is fixed and […]
INTERVIEW SHORT QUESTION ANSWERS ON STRENGTH OF MATERIALS – Numerical problems on (Second moment of inertia, elongation due to self weight and external load, Section modulus, Deflection at free end of a cantilever, Ratio of torsional moments of solid and hollow shafts, ratio of maximum bending and shear stresses in a shaft under M and […]
Multiple choice Questions (mcq) on Strength of Materials – On Bending and Shear Stresses in Beams and Buckling of Columns Bending of beam occurs under (a) Axial load (b) Transverse load (c) Direct load (d) None (Ans: b) Buckling of a column occurs under (a) Axial load (b) Transverse load (c) Direct load (d) None […]
SOM Short Interview Question Answers on column and struts Q What is a column? It is a vertical member under an axial compressive load. Load may be axial or eccentric. It can be a short, medium or long column depending upon the Le/k ratio. It is called the slenderness ratio. In this, Le is the equivalent […]
S O M — Short Interview Question Answers on Bending Stress, Torsional Stress, Buckling Stress and Complex Stress 11. What is a bending stress? What is its symbol? What are its units? Bending stress is caused due to load perpendicular to the length (lateral load) in a beam. Bending of beams causes both tensile and […]